HNP324-IR/32X 4MP IR PTZ Dome Network Camera 1/1.8″ progressive scan CMOS 2560 x 1440 Full HD resolution 32X optical zoom 200m IR distance True Day/Night, 3D DNR, Digital WDR 3D intelligent positioning 24VAC / High-PoE power supply
HNR32P6-16 16 Channel & 16 POE Network Video Recorder Up to 16Ch. IP cameras input 160 Mbps Bit rate input Max and 160 Mbps Bit rate output Max Third-party network cameras supported Up to 12MP resolution recording Independent VGA and HDMI output VGA output up to 1080p@60Hz, HDMI output up to 4K@30Hz 2 SATA HDD interface up to 12TB each
HNR33P6-16 16 Channel & 16 POE Network Video Recorder Up to 16Ch. IP cameras input 160 Mbps Bit rate input Max and 160 Mbps Bit rate output Max Third-party network cameras supported Up to 12MP resolution recording Independent VGA and HDMI output VGA output up to 1080p@60Hz, HDMI output up to 4K@30Hz 2 SATA HDD interface up to 12TB each 2-ch@12 MP (30 fps)/3-ch@8 MP (30 fps)/6-ch@4 MP (30 fps)/12-ch@1080p (30 fps)
HTA-IP01P PoE Extender over Coax (2 each) To extend IP/POE camera over coax cable. Connects IP/POE camera to 10/100BaseT POE Injector/Switch over one coax cable. Support POE: IEEE 802.3af and IEEE802.3at. Support 10/100 Mbps transmission rate. Power source from POE Injector/ POE Switch (sold separately).
HTA-PW1602 16-port FE PoE + 2-port GE Switch HTA-PW1602 HTA-PW1602 is supporting up to 30W on each LAN port if its port DIP switch is ON Two 10/100/1000M (UTP) are used to connect with other edge switch or NVR as uplink ports
HTP-WIBA3230 HTP-WIBA3230 Wimax 23dBi Directional Panel Antenna 5GHZ Wimax 23dBi Directional Panel Antenna 5GHZ
HER503-16 16-ch H.264/MPEG4/MPEG2/MJPEG Video Encoder H.264/MPEG4/MPEG2/MJPEG encoding standards supported Support encoding video at up to 4CIF resolution One independent PoE network interfaces Connectable with network HDD in NAS, IPSAN mode Support multiple network protocols, including IPv4/v6, HTTP, HTTPS, QoS layer3 DiffServ, FTP, SMTP, Bonjour, UPnP, SNMPv1/v2c/v3, OnVIF, PSIA, SOCKSv4/v5, etc.; Multiple PTZ protocols
HHR301-16 16 Ch. Analog Camera + 16 Ch. IP Camera / Mix and Match, up to total of 32 Ch. IP Camera This model has been replaced by HHR315-16 H.264 video compression Third-party network cameras supported Up to3 Megapixels resolution recording HDMI and VGA output at up to 1920×1080P resolution 4/8/16 ch synchronous playback
HNC303-VD 3.0MP Vari-Focus IR, Vandal-Proof Dome, Exterior This model has been replaced by HNC324-VDZ/VDZB 3 Megapixel (2048 x 1536) Resolution Full HD 1080p real-time video IR LEDs: up to 60ft. True WDR & 3D DNR & BLC On-board storage (up to 128GB) IP66 & IK10 Vandal-proof
HNC304-WDC 4MP WDR Wi-Fi Fixed, Vandal-Proof Mini Dome, Exterior This model has been replaced by the HNC324-WDC Up to 4 megapixel (2688 x 1520) resolution Full HD1080p real-time video Built in Mic True WDR & 3D DNR & BLC On-board storage (up to 128 GB) IP66 & IK08 protection Vandal-proof housing
HNP302-OD 2 MP PTZ Dome Network Camera This model has been replaced by HNP312-OD/25X 1/2.8’’ Progressive Scan CMOS 1080P Full HD resolution 20X optical zoom, 16X digital zoom True Day/Night, 3D DNR, Digital WDR 3D intelligent positioning 24VAC
HNP313-OD/30X 3 MP PTZ Dome Network Camera 1/2.8’’ Progressive Scan CMOS 2048 x 1536 Full HD resolution 30X optical zoom, 16X digital zoom True Day/Night, 3D DNR, Digital WDR 3D intelligent positioning 24VAC
HNR31P4-4 4 Channel & 4 POE Network Video Recorder This model has been replaced by HNR32P4-4 Up to 4Ch. IP cameras input 40 Mbps Bit rate Input Max and 80 Mbps Bit rate Output Max Third-party network cameras supported Up to 8 MP resolution recording HDMI and VGA output are up to 1920 x 1080P resolution Plug & Play with 4 independent PoE network interfaces 1 SATA HDD interface up to 8TB each
HTA-PW802 8-port FE PoE + 2-port GE Switch HTA-PW802 HTA-PW802 is supporting up to 30W on each LAN port if its port DIP switch is ON Two 10/100/1000M (UTP) are used to connect with other edge switch or NVR as uplink ports
HTP-WIFP350N (Close Out) HTP-WIFP350N is a wireless outdoor access point which is designed specifically for use with IP surveillance systems. This access point can work with wireless (802.11a/b/g/n) network cameras, and bridge separate local network wirelessly as well. 802.11 a/b/g/n Wireless Connectivity Power over Ethernet (PoE) capability Supports WPS, WEP and WPA Wireless Security Pole-Mountable
HDR503-1 1-ch H.264/MPEG4 HD video/Audio Decoder H.264 and MPEG4 video stream supported 1-ch Decoder Up to 5 Megapixels resolution decoding HDMI and VGA output at up to 1920×1080P resolution SADP(IP Finder),UDP, RTP and NTP protocols Video display on TV wall Active and passive decoding modes 32 users with multi-user level management