Model Number |
HNC301-CU |
|
Image Sensor |
1/3″ progressive scan CMOS |
|
Min. illumination |
0.01 lux @ F1.2, AGC ON, 0 lux with IR |
|
Shutter time |
1/25s (1/30s) ~ 1/100, 000s |
|
Lens |
4mm @ F2.0, angle of view: 75.8° (2.8mm, 6mm optional) |
|
Day & night |
ICR |
|
Digital noise reduction |
3D DNR |
|
Wide dynamic range |
Digital WDR |
|
Backlight compensation |
Yes, zone configurable |
|
Video compression |
H.264 / MJPEG |
|
H.264 compression profile |
Main profile |
|
Bit rate |
32 Kbps ~ 16 Mbps |
|
Audio compression |
G.711 / G 726 |
|
Audo bit rate |
64 Kps(G.711) 16 Kbps (G.726) |
|
Max. image resolution |
1280 x 960 |
|
Frame rate |
50 Hz 30 fps (1280 x 960), 30 fps (1280 x 720) 60 Hz 30 fps (1280 x 960), 30 fps (1280 x 720) |
|
Image settings |
NAS (iSCS optional) |
|
Alarm trigger |
PIR detection, motion detection, tampering alarm, network disconnect, IP address confflict, storage exception, storage error. |
|
Protocols |
TCP/IP, HTTP, DHCP, DNS, DDNS, RTP, RTSP, PPPoE, SMTP, NTP, SNMP, HTTPS, FTP, 802.1x, Qos |
|
System Compatibility |
ONVIF, PSIA, CGI |
|
General functionalities |
Flickerless, dual stream, heartbest, miorror, user authertication, video mask, watermark |
|
Communication interface |
1 RJ45 10M/ 100 M Ethernet interface |
|
Onboard storage |
Built-in Micro SD/SDHG/SDXG card slot, up to 64 GB |
|
Alarm I/O |
1/1 |
|
Wi-Fi standard |
IEEE802,11b/g/n |
|
Frequency range |
2.4 GHz ~ 2.4835 GHz |
|
Communication brandwidth |
Support 20/40 MHz |
|
Security |
64/128-bit WEP, WPA/WPA2, WPA-PSK/WPA2-PSK, WPS |
|
Transmission rate |
11b: 11Mbps, 11g: 54Mbps, 11n: 135Mbps |
|
Operating conditions |
-30 °C ~ 60 °C (-22 °F ~ 140 °F) humidity 90% or less (non-condensing) |
|
Power supply |
12 VDC +/- 10%, PoE (802.3af) |
|
Power consumption |
Max. 5.5W |
|
PIR detection range |
Max. 30 feet |
|
PIR detection angle |
80° |
|
Dimensions (mm) |
66 x 70.6 x 139.1 (2.60″ x 2.78″ x 5.48″) |
|
Weight |
400g (0.88lbs) |
|