Grid view List view

Showing all 8 results

HTA-TPA008-1

Active Twisted Pair Transceiver Panel 8 Port, Transceiver Hub In 1U rack mounting panel, Built in a highly balanced mode of video transmission for extra interference immunity

  • HTA-TPA016 16 Port Active Receiver Hub In 1U Rack Mounting Panel
  • Built in 16/8 port TTA111VR active receivers in 1U 19″ rack mounting panel
  • Built in a highly balanced mode of video transmission for extra interference immunity
  • Built in transient protection and ground lifting

HTA-TPA016-1

Active Twisted Pair Transceiver Panel 16 Port, Transceiver Hub In 1U rack mounting panel, Built in a highly balanced mode of video transmission for extra interference immunity

  • HTA-TPA016 16 Port Active Receiver Hub In 1U Rack Mounting Panel
  • Built in 16/8 port TTA111VR active receivers in 1U 19″ rack mounting panel
  • Built in a highly balanced mode of video transmission for extra interference immunity
  • Built in transient protection and ground lifting

HTA-TPP016

Twisted Pair Transmission Panel 16 Port Passive Transceiver Hub In 1U Rack Mounting Panel

  • Built in 16 port passive transceivers in 1U 19” rack mounting panel
  • Use with HTA-TTP111VT, rack mounting passive transmitter or receiver hub at distance up to 600 meters (300 meters for DVR, Multiplexer)
  • As a rack mounting passive transmitter hub, use with HTA-TTP111VT receiver at distance up to 1000 meter
  • Built in red LED for video receives on each port
  • Exceptional interference rejection

HTA-TTA111VR-1

Active Video Receiver BNC Male To 2 screw terminal adapter. video transceivers provide a highly balanced mode of video transmission. Five-position distance range switch to adjust transmission distance up to 2 km, which is immune to interference from these, and other sources of noise. Cable requirement: UTP, AC24V/DC12V dual power

  • Transmit a full motion color or monochrome video signal and data signal
  • Five position distance range switch to adjust transmission a full motion monochrome video signal up to 2400 meters, color video signal up to 1500 meters
  • System is integrated with alarm sensor (PIR, Magnetic, etc.) or data (Pan, Tilt, Zoom)
  • Built in transient protection and ground lifting, damaging voltage spike problems are eliminated
  • AC24V/DC12V dual power for HTA-TTA111VR-1 model
  • Red LED: power on/off for HTA-TTA111VR-1 model
  • Power supply included

HTA-TTA111VT-1

Active Video Transceiver BNC male to 2 screw terminal adapter. Video transceivers provide a highly balanced mode of video transmission which is immune to interference from these, and other sources of noise. Cable requirement: UTP. Power Supply: AC24V/DC12V

  • Transmit a full motion color or monochrome video signal, color range 1500 meters, B/W video signal up to 2400 meters
  • Three position range switch for gain select on Transmitter HTA-TTA111VT-1
  • Built in transient protection and ground lifting, damaging voltage spike problems are eliminated
  • Red LED: Power on/off
  • Green LED: Video receive/loss
  • Up to multi pieces HTA-TTA111VT-1 transmitter can work with 4 channel Hub TTA414VR or 1U rack mounting TPA008, TPA016 receiver panel

HTA-TTP111VC

Passive Video Transceiver BNC Male to 2 screw terminal adapter. video transceivers provide a highly balanced mode of video transmission, which is immune to interference from these, and other sources of noise.
Cable requirement: UTP wire

  • BNC male to Terminal block.
  • Transmit a full motion color or monochrome video signal up to 600 meters
  • Includes BNC male to 2 screw terminal adapter
  • Passive, no power required
  • Built in impedance couple device and noise filter for exceptional interference immunity
  • Up to 16 pieces HTA-TTP111VC can work with HTA-TPP016, HTA-TPA008-1, HTA-TPA016-1 receiver panel

HTA-TTP111VL

Passive Video Transceiver BNC Male To 2 screw terminal adapter. video transceivers provide a highly balanced mode of video transmission, which is immune to interference from these, and other sources of noise. Cable requirement: UTP wire

  • BNC male to Terminal block.
  • Transmit a full motion color or monochrome video signal up to 600 meters
  • Includes BNC male to 2 screw terminal adapter
  • Passive, no power required
  • Built in impedance couple device and noise filter for exceptional interference immunity
  • Up to 16 pieces HTA-TTP111VL can work with HTA-TPP016, HTA-TPA008-1, HTA-TPA016-1 receiver panel

HTA-TTP111VT

Passive Video Transceiver BNC Male To 2 screw terminal adapter. video transceivers provide a highly balanced mode of video transmission, which is immune to interference from these, and other sources of noise. Cable requirement: UTP wire

  • BNC male to Terminal block
  • Transmit a full motion color or monochrome video signal up to 600 meters
  • Includes BNC male to 2 screw terminal adapter
  • Passive, no power required
  • Built in impedance couple device and noise filter for exceptional interference immunity
  • Up to 16 pieces HTA-TTP111VT can work with HTA-TPP016, HTA-TPA008-1, HTA-TPA016-1 receiver panel