Description
| Specifications | ||
|---|---|---|
| Model | HNC322-MB | |
| Image Sensor | 1/2.8″ Progressive Scan CMOS | |
| Min. Illumination | 0.01Lux @ (F1.2, AGC ON) ,0 Lux with IR | |
| Shutter Speed | 1/25(1/30) s to 1/100,000 s | |
| Lens | 4mm (2.8mm optional) | |
| Lens Mount | M12 | |
| Day &Night | IR cut filter with auto switch | |
| Digital Noise Reduction | 3D DNR | |
| Wide Dynamic Range | Digital WDR | |
| Video Compression | H.264/ MJPEG | |
| Video Bit Rate | 32 Kbps – 8 Mbps | |
| Dual Stream | Yes | |
| Max. Resolution | 2MP CMOS,(1920 × 1080) | |
| Frame Rate | 60Hz: 30fps(1920 × 1080), 30fps (1280 × 960), 30fps (1280 × 720) | |
| Image Settings | Rotate mode, Saturation, Brightness, Contrast adjustable by client software or web browser |
|
| Backlight compensation | Yes, zone optional | |
| ROI | Supported, max 1 ROI | |
| Network Storage | NAS | |
| Alarm Trigger | Motion detection, Dynamic analysis, Tampering alarm | |
| Protocols | TCP/IP,ICMP,HTTP,HTTPS,FTP,DHCP,DNS,DDNS,RTP,RTSP,RTCP, PPPoE,NTP,UPnP,SMTP,SNMP,IGMP,802.1X,QoS,IPv6,Bonjour |
|
| Security | User Authentication, Watermark | |
| Standard | ONVIF, PSIA, ISAPI | |
| Communication Interface | 1 RJ45 10M/100M Ethernet interface | |
| Reset Button | Yes | |
| Operating Conditions | -30 °C – 60 °C (-22 °F – 140 °F) Humidity 95% or less (non-condensing) |
|
| Power Supply | 12 V DC ± 10% , PoE (802.3af) | |
| Power Consumption | Max. 7 W | |
| Ingress Protection level | IP66 | |
| IR Range | up to 100ft. | |
| Dimensions | 60.4×76.9×139.28 mm (2.4” × 3.0” × 5.5”) | |
| Weight | 500g (1.1 lbs) | |
| Electrical Box | HTH-280ZJ-XS | |
| Pole,Corner | P:HTH-275ZJ,C:HTH-276ZJ |
