Active Video Receiver BNC Male To 2 screw terminal adapter. video transceivers provide a highly balanced mode of video transmission. Five-position distance range switch to adjust transmission distance up to 2 km, which is immune to interference from these, and other sources of noise. Cable requirement: UTP, AC24V/DC12V dual power
Transmit a full motion color or monochrome video signal and data signal
Five position distance range switch to adjust transmission a full motion monochrome video signal up to 2400 meters, color video signal up to 1500 meters
System is integrated with alarm sensor (PIR, Magnetic, etc.) or data (Pan, Tilt, Zoom)
Built in transient protection and ground lifting, damaging voltage spike problems are eliminated
Active Video Transceiver BNC male to 2 screw terminal adapter. Video transceivers provide a highly balanced mode of video transmission which is immune to interference from these, and other sources of noise. Cable requirement: UTP. Power Supply: AC24V/DC12V
Transmit a full motion color or monochrome video signal, color range 1500 meters, B/W video signal up to 2400 meters
Three position range switch for gain select on Transmitter HTA-TTA111VT-1
Built in transient protection and ground lifting, damaging voltage spike problems are eliminated
Red LED: Power on/off
Green LED: Video receive/loss
Up to multi pieces HTA-TTA111VT-1 transmitter can work with 4 channel Hub TTA414VR or 1U rack mounting TPA008, TPA016 receiver panel
16 Channel Passive Video, Power, Transceiver Hub with AC Power Supply in 1U Rack Mounting Hub
The 16-channel TPP016VPJ45 is using standard CAT5 & RJ45 structured building wiring to carry video and power for simplifying short range installation by centralizing power and reducing installation labor costs. The built in AC24V power supply could support at-distance camera loads up to 500mA per channel. Use with TTP111VPJ45 at camera side to send video, and power for cable runs 300 meters (max.)
TPP016VPJ45 16 Channel Passive Video, Power Transceiver Hub with AC Power
Supply in 1U Rack Mounting Hub. TPP016VPJ45Integrate and send video and power over a single RJ45 4 pairs cable for up to 300 meters
Each RJ45 connector for connecting power and video from video-power transceiver at each camera, for up to 16 cameras
16 x RJ45 connector for 16 channel video input + power output
16 x BNC connector for 16 channel video output to DVR
8Amp AC24V power, each port output current up to 0.5Amp for camera, max up to 8 Amp total
Built in “smart fuse” to avoid current overload
Built in PTC (positive temperature coefficient) for short protection and auto rework on each port
Built in surge protection
Use with HTA-TTP111VPJ45 video, power transceiver at the camera side
Monochrome video signal up to 1800ft, color video signal up to 1200ft
Passive Video Transceiver BNC Male To RJ-45 terminal adapter. video transceivers provide a highly balanced mode of video transmission, which is immune to interference from these, and other sources of noise. Cable requirement: UTP wire
BNC male to RJ-45 Terminal block
Transmit a full motion color or monochrome video signal up to 600 meters
Passive, no power required
Built in impedance couple device and noise filter for exceptional interference immunity
Up to 16 pieces HTA-TTP111V3J45 can work with 16 port Transmission Panel HTA-TPP016-RJ45
Passive Video Transceiver BNC Male to 2 screw terminal adapter. video transceivers provide a highly balanced mode of video transmission, which is immune to interference from these, and other sources of noise. Cable requirement: UTP wire
BNC male to Terminal block.
Transmit a full motion color or monochrome video signal up to 600 meters
Includes BNC male to 2 screw terminal adapter
Passive, no power required
Built in impedance couple device and noise filter for exceptional interference immunity
Up to 16 pieces HTA-TTP111VC can work with HTA-TPP016, HTA-TPA008-1, HTA-TPA016-1 receiver panel
Passive Video Transceiver BNC Male To 2 screw terminal adapter. video transceivers provide a highly balanced mode of video transmission, which is immune to interference from these, and other sources of noise. Cable requirement: UTP wire
BNC male to Terminal block.
Transmit a full motion color or monochrome video signal up to 600 meters
Includes BNC male to 2 screw terminal adapter
Passive, no power required
Built in impedance couple device and noise filter for exceptional interference immunity
Up to 16 pieces HTA-TTP111VL can work with HTA-TPP016, HTA-TPA008-1, HTA-TPA016-1 receiver panel
Passive Video Transceiver BNC Male To 2 screw terminal adapter. video transceivers provide a highly balanced mode of video transmission, which is immune to interference from these, and other sources of noise. Cable requirement: UTP wire
BNC male to Terminal block
Transmit a full motion color or monochrome video signal up to 600 meters
Includes BNC male to 2 screw terminal adapter
Passive, no power required
Built in impedance couple device and noise filter for exceptional interference immunity
Up to 16 pieces HTA-TTP111VT can work with HTA-TPP016, HTA-TPA008-1, HTA-TPA016-1 receiver panel
Twisted Pair Transmission Panel 4 Port Passive Transceiver Hub In 1U Rack Mounting Panel w/ build in BNC and RJ-45 terminal
Built in 4 port passive transceivers with BNC and RJ-45 terminal
Use with HTA-TTP111VL, HTA-TTP111VC, and HTA-TTP111V3J45 passive transmitter or receiver hub at distance up to 600 meters (300 meters for DVR, Multiplexer)
Operate with HTA-TTP111VT-1 receiver at distance up to 1000 meters