Grid view List view

Showing 401–416 of 1191 results

HTA-TTP111VGA

Passive VGA Extension kits over CAT5 cable, 150ft.

  • VGA connector to shielding RJ45 female*2pcs
  • Passive, no power need
  • Up to 135 meters via standard 4 pairs CAT 5 STP cable instead of VGA cable
  • Supports up to 1,280 x 1,024 pixels
  • Work with desktop PCs, laptops, LCD projectors, plasma displays
  • Perfect for classrooms, lecture halls, tradeshows, video information displays…etc

HTA-TTP111VL

Passive Video Transceiver BNC Male To 2 screw terminal adapter. video transceivers provide a highly balanced mode of video transmission, which is immune to interference from these, and other sources of noise. Cable requirement: UTP wire

  • BNC male to Terminal block.
  • Transmit a full motion color or monochrome video signal up to 600 meters
  • Includes BNC male to 2 screw terminal adapter
  • Passive, no power required
  • Built in impedance couple device and noise filter for exceptional interference immunity
  • Up to 16 pieces HTA-TTP111VL can work with HTA-TPP016, HTA-TPA008-1, HTA-TPA016-1 receiver panel

HTA-TTP111VPJ45

Video & Power Transceiver BNC to RJ45

  • Smart twisted pair transmission products are designed for CCTV signal transmission over unshielded twisted pair wire (CAT 5 network cable)
  • These smart cabling system transmission are an alternative solution to coaxial and fiber based systems
  • Passive Video Transceiver (no power required), transmission range color 400 meters, B/W 600 meters via CAT 5 UTP Cable

HTA-TTP111VPK

Video & Power Transceiver with pigtail cable for BNC and power (2 pieces in one pair package)

  • To send video & power via one CAT5 UTP cable
  • 6 pin terminal connector for easy connection
  • One/two/three pairs of CAT5 for power connection based on camera power consumption and transmission range
  • HTA-TTP111VPKT Video Transceiver BNC male to 6 pin Terminal connector With Power Cord (DC Plug)
  • HTA-TTP111VPKR Video Transceiver BNC male to 6 pin Terminal connector With Power Cord (DC Jack)

HTA-TTP111VT

Passive Video Transceiver BNC Male To 2 screw terminal adapter. video transceivers provide a highly balanced mode of video transmission, which is immune to interference from these, and other sources of noise. Cable requirement: UTP wire

  • BNC male to Terminal block
  • Transmit a full motion color or monochrome video signal up to 600 meters
  • Includes BNC male to 2 screw terminal adapter
  • Passive, no power required
  • Built in impedance couple device and noise filter for exceptional interference immunity
  • Up to 16 pieces HTA-TTP111VT can work with HTA-TPP016, HTA-TPA008-1, HTA-TPA016-1 receiver panel

HTA-TTP414HD

4CH HD-CVI / TVI / AHD HD Video Tranceiver

  • 4CH UTP Video Tranceiver, send 4 HD camera signal over one CAT5e / CAT6 cable
  • To send HD-CVI, AHD signal up to 300M over UTP cable
  • To send HD-TVI signal up to 200M over UTP cable

HTA-TTP414VJ45

Twisted Pair Transmission Panel 4 Port Passive Transceiver Hub In 1U Rack Mounting Panel w/ build in BNC and RJ-45 terminal

  • Built in 4 port passive transceivers with BNC and RJ-45 terminal
  • Use with HTA-TTP111VL, HTA-TTP111VC, and HTA-TTP111V3J45 passive transmitter or receiver hub at distance up to 600 meters (300 meters for DVR, Multiplexer)
  • Operate with HTA-TTP111VT-1 receiver at distance up to 1000 meters
  • Built in red LED for video receives on each port
  • Exceptional interference rejection

HTC-11G29DNR

1/3″ High Resolution CCD Color DSP, 580TVL 2.9mm Corner Vandal Proof Dome camera

  • Vandal resistance
  • Day / Night Feature
  • 580 TVL w/ 0.05 Lux
  • Corner Mount w/ optional Heater
  • AC 24V / DC 12V, Dual Voltage

HTC-11GWD28DID

1/3” Pixem Beluga WDR 2.8~10mm IR Exterior Dome Cameras

  • OSD function control
  • Day and Night function: Auto switch from Color to B/W
  • Built in 2.8~10mm lens
  • Camera ID: up to 12 characters
  • Low speed shutter up to 32X
  • Adjustable function: Wide Dynamic Range, Back light compensation, Gain control, White Balance, Digital Slow Shutter
  • Dual Voltage: DC 12V / AC 24V

HTC-21636

1/3″ High Resolution B/W CCD, 580TVL 3.6mm 12VDC Board Camera

  • Full digital process of BLC
  • Auto White Balance
  • 1H mode of H.V. aperture correction
  • Electronic Shutter up to 1/100,000

HTC-21636V24

1/3″ High Resolution B/W CCD Camera, 580TVL 3.6mm Board Camera

  • Digital control of BLC
  • Auto White Balance
  • 1H mode of H.V. aperture correction
  • Digital process of color matrix
  • Electronic Shutter up to 1/100,000

HTC-26636V24

1/3″ High Resolution low light CCD Color DSP, 580TVL 3.6mm Board Camera

  • Digital control of BLC
  • Auto White Balance
  • 2H mode of H.V. aperture correction
  • Digital process of color matrix
  • Electronic Shutter up to 1/100,000

HTC-2H1

1/3″ Medium Resolution CCD Color DSP 400TVL 3.6mm 12VDC Board Camera

  • Full digital process of BLC
  • Auto White Balance
  • 2H mode of H.V. aperture correction
  • Digital process of color matrix
  • Electronic Shutter up to 1/10,000

HTC-2H1C

1/3″ Medium Resolution CCD Color DSP 400TVL 12VDC 3.6mm Board Camera

  • Full digital process of BLC
  • Auto White Balance
  • 2H mode of H.V. aperture correction
  • Digital process of color matrix
  • Electronic Shutter up to 1/10,000

HTC-2H1S

1/3″ Medium Resolution CCD Color DSP 400TVL 3.7mm 12VDC Board Camera

  • Full digital process of BLC
  • Auto White Balance
  • 2H mode of H.V. aperture correction
  • Digital process of color matrix
  • Electronic Shutter up to 1/10,000

HTC-2H1SC

1/3″ Medium Resolution CCD Color DSP 400TVL 3.7mm 12VDC Board Camera

  • Full digital process of BLC
  • Auto White Balance
  • 2H mode of H.V. aperture correction
  • Digital process of color matrix
  • Electronic Shutter up to 1/10,000