Showing 97–112 of 1192 results

HACC-KIS701

Two-Wire Video Intercom Bundle

Door Station

  • Video intercom Function
  • Low Illumination 2MP HD Colorful 155 Fisheye Camera
  • Tampering Alarm and Door Magnetic Alarm Supported
  • Supports Surface Mounting and Flush Mounting

Indoor Station

  • Hands-free audiovisual communication with the door station and the master station in the intercom system
  • Supports monitoring door stations and external cameras
  • Noise suppression and echo cancellation
  • Community notice supported

Video/Audio Distributor

  • Nine two-wire interface to support nine two-wire indoor stations
  • One 10/100M self-adaptive network interface to support external switch
  • 24 VDC power supply and communications between door stations and indoor station

HACC-LH250-LZ

LZ-Bracket of Magnetic Lock, for HACC-LH250S/D

  • The LZ-bracket adopts aldural material with the surface sandblast
  • It is suitable for in-swing doors
  • The door opens towards inside at the angle of 90 degrees
  • The shell is hard anodizing electroplating operated

HACC-LH250-U

U-Bracket of Magnetic Lock, for HACC-LH250S/D

  • The U-bracket adopts aldural material with the surface sandblast
  • It is suitable for frameless glass door
  • The door opens towards inside at the angle of 90 degrees
  • The U-bracket is suitable for magnetic lock 300kg series
  • The shell is hard anodizing electroplating operated
  • the thickness of glass should be 10 to 15mm

HACC-LH250D

Double Door Magnetic Lock

  • The Magnetic Lock supports static
  • The power supply can be customized to be 12VDC or 24VDC, and the default voltage is 12VDC
  • It is equipped with internal voltage dependent resistor (MOV)
  • It is applied to wooden door, glass door, metal door, and fireproof door
  • LED indicator displays the status of door lock
  • Signal output of door lock status (NONCCOM)
  • Anti-residual magnetism design
  • Abrasion-proof material
  • The shell is made up of aldural and is hard anodizing electroplated
  • No mechanical failure, and the magnetic lock works by electromagnetism force

HACC-LH250S

Single Door Magnetic Lock

  • The Magnetic Lock supports static Linear thrust of 300kg
  • The power supply can be customized to be 12VDC or 24VDC, and the default voltage is 12VDC
  • It is equipped with internal voltage dependent resistor (MOV)
  • It is applied to wooden door, glass door, metal door, and fireproof door
  • LED indicator displays the status of door lock
  • Signal output of door lock status (NONCCOM)
  • Anti-residual magnetism design
  • Abrasion-proof material
  • The shell is made up of aldural and is hard anodizing electroplated
  • No mechanical failure, and the magnetic lock works by electromagnetism force

HACC-LT100

Electric Bolt

  • Photoelectric control technique to avoid mechanical failure
  • Ultra-cold design and ultralow-consumption to make the electric bolt safer and more durable
  • 500 thousands times of locking operation
  • Equipped with internal voltage dependent resistor (MOV)
  • Equipped with smart one-chip
  • The main body and bolt of the electric strike is made up of alloy and stainless steel respectively

HACC-LT100-U1

Lower U-bracket of Electric Bolt, for Using with HACC-LT100

  • The brackets is made up of aluminum alloy
  • It is suitable for fully frameless glass door
  • The door opens both sides at the angle of 180 degree

HACC-LT100-U2

Upper and Lower U-bracket of Electric Bolt, for Using with HACC-LT100

  • The brackets is made up of aluminum alloy
  • It is suitable for fully frameless glass door
  • The door opens both sides at the angle of 180 degree

HACC-R101M

Mifare Card Reader

  • PC+ABS
  • Equipped with the 32-bit high-speed processor
  • Built-in audible beeper
  • Display the reader status with LED indicator
  • DIP Switch
  • RS485 and Wiegand (W26/W34) protocol
  • Tamper-proof alarm
  • Dust-proof and water-proof design

HACC-R101MK

Mifare Card Reader with Keypad

  • PC+ABS
  • Equipped with the 32-bit high-speed processor
  • Built-in audible beeper
  • Display the reader status with LED indicator
  • DIP Switch
  • RS485 and Wiegand (W26/W34) protocol
  • Tamper-proof alarm
  • Dust-proof and water-proof design
  • 12 Key Keypad

HACC-R102E

EM Card Reader

  • PC + ABS material shell with PMMA panel design and alloy decoration
  • Equipped with the 32-bit high-speed processor
  • Built-in audible beeper
  • Display the reader status with LED indicator
  • DIP Switch
  • RS485 and Wiegand (W26/W34) protocol
  • Tamper-proof alarm
  • Dust-proof and water-proof design

HACC-R102EK

EM Card Reader with keypad

  • PC + ABS material shell with PMMA panel design and alloy decoration
  • Equipped with the 32-bit high-speed processor
  • Built-in audible beeper
  • Display the reader status with LED indicator
  • DIP Switch
  • RS485 and Wiegand (W26/W34) protocol
  • Tamper-proof alarm
  • Online upgrade function (under the 485 communication mode), and card reader can degrade to pre-upgrade status in case of upgrading failed
  • Dust-proof and water-proof design

HACC-R102MK

Mifare Card Reader with keypad

  • PC + ABS material shell with PMMA panel design and alloy decoration
  • Equipped with the 32-bit high-speed processor
  • Built-in audible beeper
  • Display the reader status with LED indicator
  • DIP Switch
  • RS485and Wiegand (W26/W34) protocol
  • Tamper-proof alarm
  • Dust-proof and water-proof design

HACC-R103M

Card Reader

  • PC + ABS material shell with PMMA panel design and alloy decoration
  • Equipped with the 32-bit high-speed processor
  • Built-in audible beeper
  • Display the reader status with LED indicator
  • DIP Switch
  • RS485 and Wiegand (W26/W34) protocol
  • Tamper-proof alarm
  • Dust-proof and water-proof design

HACC-R103MK

Card Reader with keypad

  • PC + ABS material shell with PMMA panel design and alloy decoration
  • Equipped with the 32-bit high-speed processor
  • Built-in audible beeper
  • Display the reader status with LED indicator
  • DIP Switch
  • RS485 and Wiegand (W26/W34) protocol
  • Tamper-proof alarm
  • Dust-proof and water-proof design

HACC-R104M

Vandal-proof Card Reader

  • PC + zinc-alloy material shell (material protection level is IK10)
  • Equipped with the 32-bit high-speed processor
  • Built-in audible beeper
  • Display the reader status with LED indicator
  • DIP Switch
  • RS 485 and Wiegand (W26/W34) protocol
  • Tamper-proof alarm
  • Online upgrade function (under the 485 communication mode), and card reader can degrade to pre-upgrade status in case of upgrading failed
  • Dust-proof and water-proof design