Showing 289–304 of 997 results

HTA-TPP016HD

16 PORT HD PASSIVE VIDEO TRANSCEIVER IN 1U RACK MOUNTING PANEL

FOR HD-CVI/HD-TVI/AHD/Analog

  • Built in 16 port passive HD video transceiver in 1U 19″ rack mounting panel.
  • Choice of 4 x RJ45 or 4 sets x 8 pin removable screw terminal for 16 channel inputs/outputs.
  • To send HD-CVI, AHD signal up to 300M over UTP cable.
  • To send HD-TVI signal up to 200M over UTP cable.
  • Passive, NO power required.
  • Eliminate Coaxial Cable.
  • To work with Active Transmitter HTA-TTA111HDT, HTA-TTA111TVIT for extra long distance transmission.
  • Built in ESD, EFT (Impulse noise) and transient protection.

HTA-TTA111HDR

HD-TVI/CVI AHD UTP Active Receiver

  • To work with passive transmitter TTP111HD for good quality picture.
  • Support HD-TVI signal up to 300M.
  • Support HD-CVI signal up to 400M.
  • Built in middle frequency, high frequency and brightness adjustment.

HTA-TTA111VGA-1

Active VGA Extension kits over CAT5 cable

  • Active type, including transmitter and receiver
  • Built in contrast, brightness adjustment at Receiver
  • Supports up to 1600×1200 @85Hz
  • Use 4 pairs UTP CAT5 cable instead of VGA cable for long rang transmission
  • Long range transmission up to 300 meters (Max.)
  • Perfect for classrooms, lecture halls, tradeshows, video information displays…etc

HTA-TTA111VR-1

Active Video Receiver BNC Male To 2 screw terminal adapter. video transceivers provide a highly balanced mode of video transmission. Five-position distance range switch to adjust transmission distance up to 2 km, which is immune to interference from these, and other sources of noise. Cable requirement: UTP, AC24V/DC12V dual power

  • Transmit a full motion color or monochrome video signal and data signal
  • Five position distance range switch to adjust transmission a full motion monochrome video signal up to 2400 meters, color video signal up to 1500 meters
  • System is integrated with alarm sensor (PIR, Magnetic, etc.) or data (Pan, Tilt, Zoom)
  • Built in transient protection and ground lifting, damaging voltage spike problems are eliminated
  • AC24V/DC12V dual power for HTA-TTA111VR-1 model
  • Red LED: power on/off for HTA-TTA111VR-1 model
  • Power supply included

HTA-TTA111VT-1

Active Video Transceiver BNC male to 2 screw terminal adapter. Video transceivers provide a highly balanced mode of video transmission which is immune to interference from these, and other sources of noise. Cable requirement: UTP. Power Supply: AC24V/DC12V

  • Transmit a full motion color or monochrome video signal, color range 1500 meters, B/W video signal up to 2400 meters
  • Three position range switch for gain select on Transmitter HTA-TTA111VT-1
  • Built in transient protection and ground lifting, damaging voltage spike problems are eliminated
  • Red LED: Power on/off
  • Green LED: Video receive/loss
  • Up to multi pieces HTA-TTA111VT-1 transmitter can work with 4 channel Hub TTA414VR or 1U rack mounting TPA008, TPA016 receiver panel

HTA-TTP016VPJ45

16 Channel Passive Video, Power, Transceiver Hub with AC Power Supply in 1U Rack Mounting Hub

The 16-channel TPP016VPJ45 is using standard CAT5 & RJ45 structured building wiring to carry video and power for simplifying short range installation by centralizing power and reducing installation labor costs. The built in AC24V power supply could support at-distance camera loads up to 500mA per channel. Use with TTP111VPJ45 at camera side to send video, and power for cable runs 300 meters (max.)

  • TPP016VPJ45 16 Channel Passive Video, Power Transceiver Hub with AC Power
  • Supply in 1U Rack Mounting Hub. TPP016VPJ45Integrate and send video and power over a single RJ45 4 pairs cable for up to 300 meters
  • Each RJ45 connector for connecting power and video from video-power transceiver at each camera, for up to 16 cameras
  • 16 x RJ45 connector for 16 channel video input + power output
  • 16 x BNC connector for 16 channel video output to DVR
  • 8Amp AC24V power, each port output current up to 0.5Amp for camera, max up to 8 Amp total
  • Built in “smart fuse” to avoid current overload
  • Built in PTC (positive temperature coefficient) for short protection and auto rework on each port
  • Built in surge protection
  • Use with HTA-TTP111VPJ45 video, power transceiver at the camera side
  • Monochrome video signal up to 1800ft, color video signal up to 1200ft

HTA-TTP111HDL

HD Video Transceiver with pigtail

  • To send HD-CVI, HD-TVI, AHD signal 720p at 300M, 1080p at 200M over UTP cable.
  • BNC male to screw terminal with 10cm mini coax cable for easy connection.
  • Compact and mini size, could mount multiple units behind multiplexer, Quad, DVR..etc
  • Passive, no power required.
  • Eliminate coaxial cable.
  • To work with Active transmitter HTA-TTA111HDT, Active receiver HTA-TTA111HDR for extra long distance transmission.

HTA-TTP111V3J45

Passive Video Transceiver BNC Male To RJ-45 terminal adapter. video transceivers provide a highly balanced mode of video transmission, which is immune to interference from these, and other sources of noise. Cable requirement: UTP wire

  • BNC male to RJ-45 Terminal block
  • Transmit a full motion color or monochrome video signal up to 600 meters
  • Passive, no power required
  • Built in impedance couple device and noise filter for exceptional interference immunity
  • Up to 16 pieces HTA-TTP111V3J45 can work with 16 port Transmission Panel HTA-TPP016-RJ45

HTA-TTP111VC

Passive Video Transceiver BNC Male to 2 screw terminal adapter. video transceivers provide a highly balanced mode of video transmission, which is immune to interference from these, and other sources of noise.
Cable requirement: UTP wire

  • BNC male to Terminal block.
  • Transmit a full motion color or monochrome video signal up to 600 meters
  • Includes BNC male to 2 screw terminal adapter
  • Passive, no power required
  • Built in impedance couple device and noise filter for exceptional interference immunity
  • Up to 16 pieces HTA-TTP111VC can work with HTA-TPP016, HTA-TPA008-1, HTA-TPA016-1 receiver panel

HTA-TTP111VGA

Passive VGA Extension kits over CAT5 cable, 150ft.

  • VGA connector to shielding RJ45 female*2pcs
  • Passive, no power need
  • Up to 135 meters via standard 4 pairs CAT 5 STP cable instead of VGA cable
  • Supports up to 1,280 x 1,024 pixels
  • Work with desktop PCs, laptops, LCD projectors, plasma displays
  • Perfect for classrooms, lecture halls, tradeshows, video information displays…etc

HTA-TTP111VL

Passive Video Transceiver BNC Male To 2 screw terminal adapter. video transceivers provide a highly balanced mode of video transmission, which is immune to interference from these, and other sources of noise. Cable requirement: UTP wire

  • BNC male to Terminal block.
  • Transmit a full motion color or monochrome video signal up to 600 meters
  • Includes BNC male to 2 screw terminal adapter
  • Passive, no power required
  • Built in impedance couple device and noise filter for exceptional interference immunity
  • Up to 16 pieces HTA-TTP111VL can work with HTA-TPP016, HTA-TPA008-1, HTA-TPA016-1 receiver panel

HTA-TTP111VPJ45

Video & Power Transceiver BNC to RJ45

  • Smart twisted pair transmission products are designed for CCTV signal transmission over unshielded twisted pair wire (CAT 5 network cable)
  • These smart cabling system transmission are an alternative solution to coaxial and fiber based systems
  • Passive Video Transceiver (no power required), transmission range color 400 meters, B/W 600 meters via CAT 5 UTP Cable

HTA-TTP111VPK

Video & Power Transceiver with pigtail cable for BNC and power (2 pieces in one pair package)

  • To send video & power via one CAT5 UTP cable
  • 6 pin terminal connector for easy connection
  • One/two/three pairs of CAT5 for power connection based on camera power consumption and transmission range
  • HTA-TTP111VPKT Video Transceiver BNC male to 6 pin Terminal connector With Power Cord (DC Plug)
  • HTA-TTP111VPKR Video Transceiver BNC male to 6 pin Terminal connector With Power Cord (DC Jack)

HTA-TTP111VT

Passive Video Transceiver BNC Male To 2 screw terminal adapter. video transceivers provide a highly balanced mode of video transmission, which is immune to interference from these, and other sources of noise. Cable requirement: UTP wire

  • BNC male to Terminal block
  • Transmit a full motion color or monochrome video signal up to 600 meters
  • Includes BNC male to 2 screw terminal adapter
  • Passive, no power required
  • Built in impedance couple device and noise filter for exceptional interference immunity
  • Up to 16 pieces HTA-TTP111VT can work with HTA-TPP016, HTA-TPA008-1, HTA-TPA016-1 receiver panel

HTA-TTP414HD

4CH HD-CVI / TVI / AHD HD Video Tranceiver

  • 4CH UTP Video Tranceiver, send 4 HD camera signal over one CAT5e / CAT6 cable
  • To send HD-CVI, AHD signal up to 300M over UTP cable
  • To send HD-TVI signal up to 200M over UTP cable

HTA-TTP414VJ45

Twisted Pair Transmission Panel 4 Port Passive Transceiver Hub In 1U Rack Mounting Panel w/ build in BNC and RJ-45 terminal

  • Built in 4 port passive transceivers with BNC and RJ-45 terminal
  • Use with HTA-TTP111VL, HTA-TTP111VC, and HTA-TTP111V3J45 passive transmitter or receiver hub at distance up to 600 meters (300 meters for DVR, Multiplexer)
  • Operate with HTA-TTP111VT-1 receiver at distance up to 1000 meters
  • Built in red LED for video receives on each port
  • Exceptional interference rejection