Showing 65–80 of 991 results

HACC-LT100

Electric Bolt

  • Photoelectric control technique to avoid mechanical failure
  • Ultra-cold design and ultralow-consumption to make the electric bolt safer and more durable
  • 500 thousands times of locking operation
  • Equipped with internal voltage dependent resistor (MOV)
  • Equipped with smart one-chip
  • The main body and bolt of the electric strike is made up of alloy and stainless steel respectively

HACC-LT100-U1

Lower U-bracket of Electric Bolt, for Using with HACC-LT100

  • The brackets is made up of aluminum alloy
  • It is suitable for fully frameless glass door
  • The door opens both sides at the angle of 180 degree

HACC-LT100-U2

Upper and Lower U-bracket of Electric Bolt, for Using with HACC-LT100

  • The brackets is made up of aluminum alloy
  • It is suitable for fully frameless glass door
  • The door opens both sides at the angle of 180 degree

HACC-R101M

Mifare Card Reader

  • PC+ABS
  • Equipped with the 32-bit high-speed processor
  • Built-in audible beeper
  • Display the reader status with LED indicator
  • DIP Switch
  • RS485 and Wiegand (W26/W34) protocol
  • Tamper-proof alarm
  • Dust-proof and water-proof design

HACC-R101MK

Mifare Card Reader with Keypad

  • PC+ABS
  • Equipped with the 32-bit high-speed processor
  • Built-in audible beeper
  • Display the reader status with LED indicator
  • DIP Switch
  • RS485 and Wiegand (W26/W34) protocol
  • Tamper-proof alarm
  • Dust-proof and water-proof design
  • 12 Key Keypad

HACC-R102E

EM Card Reader

  • PC + ABS material shell with PMMA panel design and alloy decoration
  • Equipped with the 32-bit high-speed processor
  • Built-in audible beeper
  • Display the reader status with LED indicator
  • DIP Switch
  • RS485 and Wiegand (W26/W34) protocol
  • Tamper-proof alarm
  • Dust-proof and water-proof design

HACC-R102EK

EM Card Reader with keypad

  • PC + ABS material shell with PMMA panel design and alloy decoration
  • Equipped with the 32-bit high-speed processor
  • Built-in audible beeper
  • Display the reader status with LED indicator
  • DIP Switch
  • RS485 and Wiegand (W26/W34) protocol
  • Tamper-proof alarm
  • Online upgrade function (under the 485 communication mode), and card reader can degrade to pre-upgrade status in case of upgrading failed
  • Dust-proof and water-proof design

HACC-R102M

Card Reader

  • PC + ABS material shell with PMMA panel design and alloy decoration
  • Equipped with the 32-bit high-speed processor
  • Built-in audible beeper
  • Display the reader status with LED indicator
  • DIP Switch
  • RS485 and Wiegand (W26/W34) protocol
  • Tamper-proof alarm
  • Dust-proof and water-proof design

HACC-R102MK

Mifare Card Reader with keypad

  • PC + ABS material shell with PMMA panel design and alloy decoration
  • Equipped with the 32-bit high-speed processor
  • Built-in audible beeper
  • Display the reader status with LED indicator
  • DIP Switch
  • RS485and Wiegand (W26/W34) protocol
  • Tamper-proof alarm
  • Dust-proof and water-proof design

HACC-R103M

Card Reader

  • PC + ABS material shell with PMMA panel design and alloy decoration
  • Equipped with the 32-bit high-speed processor
  • Built-in audible beeper
  • Display the reader status with LED indicator
  • DIP Switch
  • RS485 and Wiegand (W26/W34) protocol
  • Tamper-proof alarm
  • Dust-proof and water-proof design

HACC-R103MK

Card Reader with keypad

  • PC + ABS material shell with PMMA panel design and alloy decoration
  • Equipped with the 32-bit high-speed processor
  • Built-in audible beeper
  • Display the reader status with LED indicator
  • DIP Switch
  • RS485 and Wiegand (W26/W34) protocol
  • Tamper-proof alarm
  • Dust-proof and water-proof design

HACC-R104M

Vandal-proof Card Reader

  • PC + zinc-alloy material shell (material protection level is IK10)
  • Equipped with the 32-bit high-speed processor
  • Built-in audible beeper
  • Display the reader status with LED indicator
  • DIP Switch
  • RS 485 and Wiegand (W26/W34) protocol
  • Tamper-proof alarm
  • Online upgrade function (under the 485 communication mode), and card reader can degrade to pre-upgrade status in case of upgrading failed
  • Dust-proof and water-proof design

HACC-R104MK

Vandal-proof Card Reader with keypad

  • PC + zinc-alloy material shell (material protection level is IK10)
  • Equipped with the 32-bit high-speed processor
  • Built-in audible beeper
  • Display the reader status with LED indicator
  • DIP Switch
  • RS 485 and Wiegand (W26/W34) protocol
  • Tamper-proof alarm
  • Online upgrade function (under the 485 communication mode), and card reader can degrade to pre-upgrade status in case of upgrading failed
  • Dust-proof and water-proof design

HACC-R1200EF

EM 2″ Card Reader with Finger Print Reader

  • Support Multiple Authentication Mode
  • Build In Buzzer
  • 2 Inch Width Compact Design
  • RS485 connections only
  • IP65 Rating

HACC-R1200MF

Mifare 2″ Card Reader with Finger Print Reader

  • Support Multiple Authentication Mode
  • Build In Buzzer
  • 2 Inch Width Compact Design
  • RS485 connection only
  • IP65 Rating

HACC-R801E

Inductive Card Reader

  • PC+ABS material shell
  • IP65 Standard
  • Wiegand(w26, w34) Protocol
  • Supports ID Card recognition, and ID card number reading
  • Supports opening door by swiping card
  • High/Low Temperature resistant design